Start with the kit, then plan replenishments
If you are new to platinum or palladium printing, the simplest way to begin is with a complete starter kit. The Laboldtech Kit03 Platinum/Palladium Combo Starter Kit bundles the sensitisers, developer, clearing bath chemicals and accessories you need to make your first prints. Once you are printing regularly, you will likely need to top up individual solutions rather than buy a whole new kit. This guide explains what each component does and how to choose the right replenishment for your workflow.
What the starter kit includes
- Laboldtech Kit03 Platinum/Palladium Combo Starter Kit: The Laboldtech Kit03 contains Potassium Chloroplatinate 20% Sol.A 10ml, Sodium Chloropalladate 17% Sol.A 25ml, Ferric Oxalate 30% Sol.B 25ml, Ferric Oxalate 30% and Potassium Chlorate 1% Sol.C 25ml, a 40mm brush, and three sheets of Bergger Cot 320 paper (25 x 15 cm). This gives you both platinum and palladium sensitisers, the iron oxalate sensitiser, a contrast agent, and basic coating tools—enough to coat 20–25 8x10-inch sheets according to the catalog.

Laboldtech Kit03 Platinum/Palladium Combo Starter Kit - Laboldtech Kit03 Platinum/Palladium Combo Starter Kit: The kit also includes Ammonium Citrate 500g for developer, Tetrasodium EDTA crystals 500g and Sodium Sulphite 500g for clearing baths, three amber PET plastic bottles, five pipettes, and one pair of plastic gloves. These are the core chemicals and containers for processing; you will need to supply your own trays, UV exposure unit, and contact frame.
- Laboldtech Kit03 Platinum/Palladium Combo Starter Kit: The catalog states the kit contains enough to coat 20–25 pieces of 8x10-inch paper. This helps you estimate how many prints you can make before needing to reorder sensitiser or other components.
Replenishment sensitisers: which solution do you need?
As you print, you will use up the sensitiser solutions faster than the developer or clearing bath. The kit includes two platinum-group sensitisers: Potassium Chloroplatinate (Solution A) and Sodium Chloropalladate (Solution A). These are the metal salts that create the image. You can buy them separately as replenishments. The choice between platinum and palladium affects image tone, contrast, and cost. Platinum tends to give a cooler, neutral black, while palladium gives a warmer, brown-black tone. Many printers mix both for a combination of qualities. The kit includes both, so you can experiment.
Platinum and palladium replenishments
- Laboldtech Potassium Tetrachloroplatinite sol. 20% - 25ml: Laboldtech Potassium Tetrachloroplatinite sol. 20% - 25ml is the replenishment sensitiser Solution A that is part of the Platinum/Palladium Kit. This is the platinum sensitiser. If you prefer the cooler tone of platinum or want to increase the platinum ratio in your mix, this is the solution to restock.

Laboldtech Potassium Tetrachloroplatinite sol. 20% - 25ml - Laboldtech Sodium Cloroplatinate (Na2) sol. 5% - 100ml: Laboldtech Sodium Cloroplatinate (Na2) sol. 5% - 100ml is the replenishment sensitiser Solution C, used in place of the Iron Oxalate with contrast that is part of the kit. Solution C is a contrast agent. The catalog describes it as used in place of the iron oxalate with contrast, which suggests it modifies contrast. This is not a primary sensitiser but a tool for adjusting print contrast.
Clearing baths and the role of tetrasodium EDTA
After development, platinum and palladium prints require clearing baths to remove residual iron salts and other chemicals. The kit includes Tetrasodium EDTA crystals and Sodium Sulphite for this purpose. Over time, your clearing bath will become exhausted and need replenishment. Tetrasodium EDTA is the key chelating agent that binds metal ions. The catalog lists a separate 1000g container of Tetrasodium EDTA crystals as a replenishment clearing bath designed for use with the Laboldtech Platinum/Palladium Kit.
Tetrasodium EDTA for clearing
- Laboldtech Tetrasodium EDTA Crystals - 1000gm: Laboldtech Tetrasodium EDTA Crystals - 1000gm is a replenishment clearing bath designed for use with the Laboldtech Platinum/Palladium Kit sold at Firstcall Photographic. If you already have the kit and your clearing bath is nearing exhaustion, this is the exact chemical to restock. The 1000g size provides ample supply for many printing sessions.
Exposure and storage: practical notes from the catalog
The kit's instructions note that the best wavelength for exposure is UV-B (315–280 nm), ideally 260 nm, or sunlight. It also warns against using inexpensive UV lights because they often emit the wrong wavelength. For storage, the catalog advises that the developer can be stored and reused after use, and that it is good practice to top it up periodically. Additionally, it states that the sensitiser should never be thrown away because it improves with time. These are useful guidelines to follow as you work.
Checklist before you buy
- Are you starting from scratch?: Buy the Kit03 combo starter kit. It includes both platinum and palladium sensitisers, developer, clearing chemicals, paper, and tools.
- Do you need more platinum sensitiser?: Order Laboldtech Potassium Tetrachloroplatinite sol. 20% - 25ml (Product 1920228) to replenish Solution A.
- Do you need more contrast agent?: Order Laboldtech Sodium Cloroplatinate (Na2) sol. 5% - 100ml (Product 1920227) to replenish Solution C.
- Is your clearing bath exhausted?: Order Laboldtech Tetrasodium EDTA Crystals - 1000gm (Product 1920234) to make fresh clearing bath.
- Do you have the right exposure equipment?: The kit does not include a UV light source or contact frame. Ensure you have a suitable UV exposure unit that emits the correct wavelength, or use sunlight.





