Firstcall Copystand 320 vs 500: Which Model Fits Your Setup?
By Firstcall Photographic | Published: 2026-11-05
Category: 비교
Compare the Firstcall Copystand 320 and 500 on base size, column height, and camera support to pick the right copy stand for document scanning and close-up work.
Quick answer
Choose the Firstcall Copystand 320 if you shoot with a compact camera or compact system camera and need a small, storable setup for documents up to about A4. Choose the Firstcall Copystand 500 if you use an SLR or need to copy larger originals, because its 12 x 18-inch base and 50cm column give you more room and height.
Base size decides what you can copy
The 320's 12 x 9-inch baseboard suits single sheets, postcards, and small book pages. The 500's 12 x 18-inch baseboard roughly doubles the working area, so you can lay out two A4 pages side by side or copy larger prints without repositioning.
Both baseboards are 18% grey, which gives you a neutral background for metering and helps avoid colour casts when copying artwork or documents.
Column height and camera weight go together
The 320's column reaches 32cm from base to camera screw, with a minimum height of 7cm when you reverse the camera mount. That is enough for tight overhead shots of flat documents with a light camera, but it limits how much you can frame larger originals.
The 500's column reaches 50cm, giving you more distance for bigger subjects or longer lenses. It also carries SLRs, which the 320 is not built for. If you plan to use a DSLR or a heavier mirrorless body, the 500 is the safer choice.
Portability and setup trade-offs
Both stands dismantle easily for storage or transport, so neither is a permanent fixture. The 320 is the smaller and lighter of the two, which makes it easier to keep on a shelf and set up on a desk when needed.
The 500's quick-release plate is a practical addition if you switch between cameras or remove the camera often. The 320 does not list a quick-release plate, so you will need to screw the camera on each time.
Key trade-offs
- Camera support: The 320 is designed for compact and compact system cameras; the 500 adds SLR support. If you own or plan to buy an SLR, pick the 500. Check your camera weight and mount before ordering.
- Copy area: The 320's 12 x 9-inch base suits single sheets and small items; the 500's 12 x 18-inch base handles larger documents or two-page spreads. Measure your largest original before deciding. If your originals are larger than roughly A4, the 500 saves you from repositioning.
- Height range: The 320 gives 7–32cm from base to camera screw; the 500 reaches 50cm. More height helps with larger subjects and framing flexibility, but also takes up more vertical space. Check the clearance above your desk or table before choosing the taller 500.
Product facts
- Firstcall Copystand 320: Low-cost, rigid copy stand for lighter cameras such as digital compacts or compact system cameras; 12 x 9-inch 18% grey baseboard; column height 7–32cm. It keeps a small camera stable for document and print copying without taking up much space.
Firstcall Copystand 320 - Firstcall Copystand 500: Intermediate unit that accommodates SLRs as well as lighter cameras; 12 x 18-inch 18% grey baseboard; column height up to 50cm; quick-release plate. It gives you a larger copy area and enough height for bigger originals or heavier cameras.
Firstcall Copystand 500
Which copystand should you buy?
Best for
- Photographers using a compact or compact system camera for document scanning and small flat art
- Anyone with limited desk space who needs a stand that dismantles for storage
Not for
- SLR users or anyone copying originals larger than about A4
- People who need a quick-release plate for frequent camera changes
