Firstcall Photographic

Fotospeed ST20 棕褐色調色劑 150ml - 可調製1.5L

Fotospeed ST20 棕褐色調色劑 150ml - 可調製1.5L - Main image
$11.38 $16.99 In stock

Category: Print & Print Processing Print Processing Chemicals

Fotospeed ST20 Sepia Toner 會在纖維與樹脂塗佈黑白相紙上產生固定的棕褐色調。它包含兩個部分:第1部分 - 漂白劑 & 第 2部分 - 調色劑。  每個部分分別混合以配製兩種工作溶液。  此調色劑會產生傳統的棕褐色,無法控制顏色。

混合說明

第 1部分:漂白劑 - 將 1+9 與水稀釋至工作溶液的體積。 

第 2部分:調色劑 - 將 1+9 與水稀釋至工作溶液的體積。  

使用方式

選定要調色的相片後,請確保其已完全定影並水洗。若是乾燥的相片,請先將其浸泡在水中 1 分鐘,以確保漂白劑均勻吸收。

  1. 將相片放入漂白浴中,輕輕攪動。漂白時間可能因紙張類型而異。 
  2. 漂白後,將相片放入流動水中:RC 相紙 1 分鐘,纖維相紙 5 分鐘。
  3. 將相片放入調色浴中,輕輕攪動並觀察影像重新顯現。使用新鮮溶液時,完全調色將在 1 分鐘內完成。
  4. 最後,用流動水清洗相片。RC 相紙水洗 2 分鐘,纖維相紙水洗 20 分鐘。

容量

漂白劑和調色劑的工作溶液都可以保存在密封容器中重複使用。然而,兩種溶液在使用後都會劣化,應預期活性減慢,且後續相片的調色劑會出現色偏。為保持棕褐色調的一致性,建議每次只配製少量(約 200 毫升)的工作溶液。將 5 - 8x10 張相片通過 200 毫升溶液後,溶液將耗盡。假設平均密度,每公升應可處理 25 - 8x10 張相片。

列印品質

如果對要調色的相片是否已完全定影和水洗有任何疑慮,應在開始調色前重新定影並徹底水洗。調色相片上的污漬可能是由於先前定影和水洗不足所致。

可變對比相紙可能對漂白劑反應較慢。如果發生這種情況,請延長漂白時間或使漂白劑更濃。整個程序應在正常的室內或日光條件下進行。

核對所選商品

可用付款方式和最終總額會在結帳頁顯示。

配送時間

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
詢問退款

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送運費

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
準備退貨

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (5.0 / 5 · 5 reviews)

Hannah ★★★★★

The two-part mix felt fiddly at first, but once I got the bleach and toner ratios down, it gave my fibre prints that rich, warm brown I was chasing. The 150ml bottle stretching to 1.5L of working solution is a solid deal for a weekend of darkroom time.

Richard ★★★★★

Was a bit intimidated by the two-part bleach and toner process at first, but the 150ml concentrate made up to 1.5L is really economical and the results on resin coated paper were exactly the warm brown I was hoping for.

Zoe ★★★★★

I've been using this two-part sepia toner set on my fiber prints and the results are consistently rich and warm. The bleach step is straightforward and the toner gives that classic vintage look I was hoping for. It made 1.5 liters as promised, which is plenty for a batch of prints.